Power supply100-240VAC~ 50/60Hz
Allowable voltage range90 to 110% of rated voltage
Power consumptionMax. 8VA
Sampling cycle50, 100, 250ms
Input type_RTDDPt100Ω, Cu50Ω, Nickel120Ω (permissible line resistance max. 5Ω)
Input type_TCK(CA), J(IC), L(IC), T(CC), R(PR), S(PR)
Input type_CT0.0-50.0A(primary current measurement range) ※CT ratio=1/1000
Display accuracyRTD/Thermocouple: ㆍ At room temperature (23℃ ±5℃): (PV ±0.3% or ±1℃, select the higher one) ±1-digit
ㆍ Out of room temperature ranges: (PV ±+H400.5% or ±2℃, select the higher one) ±1-digit
Display accuracy_CT input±5% F.S. ±1-digit
Control output_SSRMax. 12VDC ±3V 20mA
Control output_CurrentSelectable DC 4-20mA or DC 0-20mA(load resistance max. 500Ω)
Option output_Trans.DC 4 - 20 mA (load resistance: ≤ 500 Ω, output accuracy: ±0.3% F.S.)
Option output_Comm.RS485 communication output (Modbus RTU/ASCII method)
Display method7-segment (red) 4-digit
Control methodON/OFF, P, PI, PD, PID
Control output_HysteresisControl output: 1 to 100℃/℉ (0.1 to 100.0℃/℉)
Alarm output: 1 to 100℃/℉ (0.1 to 50.0℃/℉)
Proportional band0.1 to 999.9℃
Integral time0 to 9999 sec
Derivative time0 to 9999 sec
Control periodRelay output: 0.5 to 120.0 sec, SSR output: 0.5 to 120.0 sec
Dielectric strengthBetween the charging part and the case : 3,000 VAC~ 50/60 Hz for 1 min
Vibration0.75 mm amplitude at frequency of 5 to 55 Hzin each X, Y, Z direction for 2 hours
Relay life cycle_MechanicalOUT1/2, AL1/2: min. 5,000,000 operations
Relay life cycle_ElectricalOUT1/2, AL1/2: min. 100,000 (resistance load: 250VAC~ 5A)
Insulation resistance100MΩ or more (500VDC megger basis)
Insulation typeDouble insulation or reinforced insulation (dielectric strength between the charging part and the case: 3 kV)
Noise immunity±2 kV square shaped noise by noise simulator (pulse width: 1 ㎲) R-phase, S-phase
Memory Protection≈ 10 years (non-volatile semiconductor memory type)
Environment_Ambient temperature-10 to 50℃, storage: -20 to 60℃
Environment_Ambient humidity35 to 85% RH, storage: 35 to 85% RH
WeightApprox. 194.5g (approx. 123.5g)
USD
- USD
- CNY
- HKD
- EUR
English
- العربية
- čeština
- dansk
- Deutsch
- Ελληνικά
- English
- Español
- Français
- ic
- Italiano
- Netherlands
- norsk Språk
- język polski
- pt
- Português
- 中文
Autonics Temperature controller
TR1D-T4CC


TR1D-T4CC
Subscribe to get prices
Model: TR1D-T4CC
Order No: Autonics TR1D-T4CC
SKU: 10000057860501
Size: 22.00 mm,91.00 mm,85.00 mm
Weight: 194.50g
In Stock
Brief Introduction
TR1D-T4CC
The TR1D series slim single display PID temperature controllers feature high-speed sampling cycle rate of 50ms with ±0.3% display-accuracy. The controllers offer high precision temperature control with simultaneous heating and cooling control. The space-saving design with 22.5mm width and DIN rail bracket allows easy installation in limited spaces. The front display can be easily used to set the control status and parameters.
Description
Unsubscribe
Subscribe