 |
SIMATIC DP, 1 ELECTRON. MODULE FOR ET 200S, 8 DI SOURCE INPUT 24V DC, 15 MM WIDTH, 1 PIECE PER PACKAGING UNIT |
| Supply voltage |
| 24 V DC |
Yes; From power module |
| permissible range, lower limit (DC) |
20.4 V |
| permissible range, upper limit (DC) |
28.8 V |
| Reverse polarity protection |
Yes |
| Input current |
| from supply voltage L+, max. |
Dependent on encoder |
| Power losses |
| Power loss, typ. |
1.2 W |
| Digital inputs |
| Number of digital inputs |
8 |
| Input characteristic curve in accordance with IEC 61131, type 1 |
Yes |
| Input voltage |
| ● Type of input voltage |
DC |
| ● Rated value, DC |
24 V |
| ● for signal "0" |
30 to -5 V |
| ● for signal "1" |
-15 to -30 V |
| Input current |
| ● for signal "1", typ. |
6 mA; at 24 V |
| Input delay (for rated value of input voltage) |
| for standard inputs |
| — Parameterizable |
No |
| — at "0" to "1", min. |
2 ms |
| — at "0" to "1", max. |
4.5 ms |
| — at "1" to "0", min. |
2 ms |
| — at "1" to "0", max. |
4.5 ms |
| Cable length |
| ● Cable length, shielded, max. |
1 000 m |
| ● Cable length unshielded, max. |
600 m |
| Encoder |
| Connectable encoders |
| ● 2-wire sensor |
Yes |
| — Permissible quiescent current (2-wire sensor), max. |
1.5 mA |
| Isochronous mode |
| Isochronous operation (application synchronized up to terminal) |
Yes |
| Interrupts/diagnostics/status information |
| Diagnostic messages |
| ● Diagnostic functions |
No |
| Diagnostics indication LED |
| ● Group error SF (red) |
No |
| ● Status indicator digital input (green) |
Yes; per channel |
| Parameter |
| Remark |
3 byte |
| Galvanic isolation |
| Galvanic isolation digital inputs |
| ● between the channels |
No |
| ● between the channels and the backplane bus |
Yes |
| Permissible potential difference |
| between different circuits |
75 VDC / 60 VAC |
| Isolation |
| Isolation checked with |
500 V DC |
| Dimensions |
| Width |
15 mm |
| Height |
81 mm |
| Depth |
52 mm |
| Weights |
| Weight, approx. |
35 g |
| last modified: |
17.09.2014 |
