ET200S Price List

Artikelnummer

6ES7132-4HB01-0AB0


Supply voltage
Load voltage L+
● Rated value (DC)		24 V
● Reverse polarity protection		Yes
Input current
from load voltage L+ (without load), max.		30 mA
from backplane bus 3.3 V DC, max.		10 mA
Power losses
Power loss, typ.		0.6 W
Address area
Address space per module
● with packing		2 bit
● without packing		1 byte
Digital outputs
Number of digital outputs		2
short-circuit protection		No
Controlling a digital input		Yes
Output current
● for signal "1" rated value		5 A
● for signal "1" minimum load current		8 mA
Switching frequency
● with resistive load, max.		2 Hz
● with inductive load, max.		0.5 Hz
● on lamp load, max.		2 Hz
Relay outputs
Switching capacity of contacts
— Thermal continuous current, max.		5 A
Cable length
● Cable length, shielded, max.		1 000 m
● Cable length unshielded, max.		600 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)		No
Interrupts/diagnostics/status information
Substitute values connectable		Yes
Diagnostic messages
● Diagnostic functions		No
Diagnostics indication LED
● Status indicator digital output (green)		Yes
Galvanic isolation
Galvanic isolation digital outputs
● between the channels		Yes
● between the channels and the backplane bus		Yes
● between the channels and the load voltage L+		Yes
Ambient conditions
Extended ambient conditions
Relative humidity
— with condensation, maximum		100 %
Dimensions
Width		15 mm
Height		81 mm
Depth		52 mm
Weights
Weight, approx.		50 g
last modified:		16.09.2014