Brief Introduction

SR-X300W

ModelSR-X300W *1TypeWide-field type (2.3 megapixels)ReceiverSensorCMOS image sensorNumber of pixels1920 × 1200FocusAuto*2EmitterIllumination light sourceHigh-intensity red/white LED*3Pointer light sourceHigh-intensity green LED*3Reading specificationsSupported symbols2D codesQR, MicroQR, DataMatrix(ECC200), DMRE, GS1 DataMatrix, PDF417, MicroPDF417,GS1 Composite (CC-A/CC-B/CC-C), DotCode, Maxi Code, Aztec CodeBarcodesCODE39, ITF, 2of5 (Industrial 2of5), COOP 2of5, NW-7 (Codabar), CODE128, GS1-128, GS1 DataBar, CODE93,JAN/EAN/UPC, Trioptic CODE39, CODE39 Full ASCII, Pharmacode, Postal (Japan Postal, IMB)Minimum resolution2D codes0.060 mm 0.0024"Barcodes0.082 mm 0.0032"Reading distance50 to 1000 mm 1.97" to 39.37"Reading field of view267 × 166 mm 10.51" × 6.54"(at a distance of 300 mm 11.81")I/O specificationsControl inputNumber of inputs2Input typeBidirectional voltage inputMaximum rating30 VDCMinimum ON voltage15 VDCMaximum OFF current0.2 mAControl outputNumber of outputs3Output typePhoto MOS relay outputMaximum rating30 VDCMaximum load current50 mA or less for 1 output, or 100 mA or less in total for 3 outputsLeakage current when OFF0.1 mA or lessResidual voltage when ON1 V or lessEthernetCommunication standardIEEE 802.3-compliant 100BASE-TXSupported protocolsTCP/IP, SNTP, FTP, SFTP, HTTP, HTTPS, BOOTP, EtherNet/IP®, PROFINET, KV STUDIO, MC protocol, OMRON PLC linkSerial communicationCommunication standardRS-232C-compliantCommunication speed600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bpsSupported protocolsNo-protocol, KV STUDIO, MC protocol, SYSWAYUSBCommunication standardUSB 2.0 High Speed compliantRatingsPower voltage24 VDC +25%/-20%Current consumptionApprox. 750 mAEnvironmental resistanceEnclosure ratingIP65/IP67 (IEC60529)*4Ambient temperature0 to +45°C 32 to 113°FStorage temperature-10 to +50°C 14 to 122°FRelative humidity35 to 85% RH (No condensation)Storage relative humidityWeightApprox. 200 g 7.06 oz*1 System ROM rewrites: 100000*2 The focal position can be adjusted automatically during installation or tuning.*3 LEDs and lamps are classified as shown below according to IEC 62471 (JIS C 7550).• Exempt group: Objects that do not cause any photobiological damage.• Risk group 1 (low risk): Objects that do not cause damage that makes constraints on normal actions necessary.• Risk group 2 (moderate risk): Objects that do not cause damage accompanied by unpleasant feelings and thermal discomfort.• Risk group 3 (high risk): Objects that cause damage even due to temporary or short-term exposure.The risk groups for this product are listed below.Pointer light source (Green): Risk group 1Illumination light source (Red): Risk group 1Illumination light source (White), Advance only: Risk group 1*4 Attach a USB port cover to meet the protective structural specification.