Brief Introduction

SR-752

ModelSR-752TypeLong-range typeReceiverSensorCMOS Image SensorNumber of pixels752 x 480 pixelsLightingLight sourceRed LEDLaser pointerVisible semiconductor laser, Wavelength 660 nmOutput60 µWPulse duration200 µsLaser classClass 1 Laser Product (IEC60825-1, FDA (CDRH) Part 1040.10*1)Reading specificationsMinimum resolution2D0.19 mm 0.007"0.33 mm 0.013" (When SR-75L4 is mounted)0.5 mm 0.02" (When SR-75L6 is mounted)Barcode0.17 mm 0.007"0.22 mm 0.009" (When SR-75L4 is mounted)0.33 mm 0.013" (When SR-75L6 is mounted)Supported symbol2DQR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, MicroPDF, Composite Code (CC-A, CC-B, CC-C)BarcodeGS1DataBar,CODE39,ITF,NW-7 (Codabar),CODE128,GS1-128,JAN/EAN/UPC,CODE39 FullASCII,CODE93,2of5 (Industrial 2of5),COOP 2of5,Trioptic CODE39Reading distance (typical examples)DataMatrix QR180 to 305 mm 7.09" to 12.01" (Cell size = 0.5 mm 0.02")300 to 490 mm 11.81" to 19.29" (Cell size = 0.5 mm 0.02") (When SR-75L4 is mounted)460 to 690 mm 18.11" to 27.17" (Cell size = 0.5 mm 0.02") (When SR-75L6 is mounted)Barcode180 to 330 mm 7.09" to 12.99" (Narrow bar width = 0.5 mm 0.02")250 to 540 mm 9.84" to 21.26" (Narrow bar width = 0.5 mm 0.02") (When SR-75L4 is mounted)400 to 760 mm 15.75" to 29.92" (Narrow bar width = 0.5 mm 0.02") (When SR-75L6 is mounted)Focal distance250 mm 9.84"400 mm 15.75" (When SR-75L4 is mounted)600 mm 23.62" (When SR-75L6 is mounted)Field of view (at focal distance)65.0 x 41.5 mm 2.56" x 1.63"108 x 69 mm 4.25" x 2.72" (When SR-75L4 is mounted)165 x 106 mm 6.50" x 4.17" (When SR-75L6 is mounted)I/O specificationsControl inputNumber of inputs2Input typeBidirectional voltage inputMaximum rating26.4 VDCMinimum ON voltage15 VDCMaximum OFF current0.2 mA or lessControl outputNumber of outputs3Output typePhoto MOS relay outputMaximum rating30 VDCMaximum load current1 output: 50 mA or less, Total of 3 outputs: 100 mA or lessLeakage current when OFF0.1 mA or lessResidual voltage when ON1 V or lessEthernetCommunication standard10BASE-T/100BASE-TXSupported protocolTCP/IP, FTP, SNTP, BOOTP, EtherNet/IPⓇ*2, PROFINET*3, MC protocol, KV STUDIOSerial communicationCommunication standardRS-232C compliantTransmission speed9600, 19200, 38400, 57600, 115200 bpsSupported protocolNon-procedural, MC protocol, SYSWAY, KV STUDIORatingPower voltageControl port: 24 VDC ±10 % or Ethernet port: PoE TypeA/B 36 to 57 V (Cannot supply at the same time)*4Current consumptionControl port: 220 mA (When 24 VDC power supply is used)Ethernet port: PoE Power Class 2*5Environmental resistanceEnclosure ratingIP65Ambient lightSunlight: 10,000 lux, Incandescent lamp: 6,000 lux, Fluorescent lamp: 2,000 luxAmbient temperature0 to +45 °C 32 to 113 °FStorage temperature-10 to +50 °C 14 to 122 °FRelative humidity35 to 95 % RH (No condensation)Storage relative humidityOperating environmentNo dust or corrosive gases presentVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 55 to 500 Hz, Acceleration 5G, 3 hours in each of the X, Y, and Z directionsWeightApprox. 175 gApprox. 185 g (When SR-75L4/L6 is mounted)*1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*2 EtherNet/IPⓇ is a trademark or registered trademark of ODVA.*3 PROFINET is a trademark or registered trademark of PROFIBUS International.*4 To comply with CSA No.61010-1/UL61010-1/IEC61010-1, use a power supply meeting the following criteria:- provides Class 2 output as defined in the CEC and NEC, or- evaluated as a Limited Power Source as defined in CAN/CSA-C22.2 No.60950-1/UL60950-1/IEC60950-1.*5 Peak operating current for PoE Power Class 2: 210 mA maximum.