Brief Introduction

IV3-500CA

ModelIV3-500CATypeStandardInstalled distance50 mm 1.97" or more *1ToolsAvailable modesStandard mode / Sorting modeTool with standard modeLearning, Outline, Color area *2, Area *3, Edge pixels, Color average *2, Brightness average *3, Width, Diameter, Edge presence, Pitch,OCR, Color prohibit *4, Brightness prohibit, Position adjustment, High-speed position adjustment (1-axis edge/2-axis edge), Blob countNumber of toolsTotal: 65 tools *5Field of viewInstalled distance 50 mm 1.97": 22 (H) × 16 (V) mm 0.87" (H) × 0.63" (V) toInstalled distance 3000 mm 118.11": 1184 (H) × 888 (V) mm 46.61" (H) × 34.96" (V)Switch settings (programs)128 programs (when using SD card) / 32 programs (when not using SD card)Image receiving elementType1/2.9 inch color CMOSNumber of pixels1280 (H) × 960 (V)Image historyNumber of storable images100 images *6Save conditionsSelectable between NG only, NG and OK near threshold *7, and All *6Focus adjustmentAuto *4Image data transferTransfer destinationSelectable between SD card, FTP server and SFTP serverTransfer formatSelectable between bmp, jpeg, iv3p, and txt, and file names can be modifiedTransfer conditionsSelectable between NG only, NG and OK near threshold *8, and AllExposure time12 μs to 10 msAnalysis informationRUN displayTools list (Judgment results, degree of similarity, or degree of similarity bar display) *8RUN informationSwitchable between OFF, histogram, processing time, count, and output monitorHistogram: Histogram, degree of similarity (Max., Min., Ave.), Number of OKs, Number of NGsProcessing time: Processing time (latest, Max., Min., Ave.)Count: Trigger numbers, Number of OKs, Number of NGs, Trigger errors, Strobe errorsOutput monitor: ON/OFF status by output *8LightsIlluminationWhite LEDLighting methodPulse lighting/ continuously lighting is switchable.Other functionsImage capture functionDigital zoom (2×, 4×), HDR, High gain, Color filter *2, White balance *2, Brightness correction, AI captureTool functionsAdditional learning, Mask outline, Masking function, Color extraction/exclusion *2, Color histogram function *2, Monochrome histogram function *3, Scaling functionUtilitiesFailing sensor list, Failure hold, Test run, I/O monitor, Security settings (Two-factor password), Simulator *9, Additional FTP/SFTP Image Information,Multi-position adjustment, Multi-master image registration, High-speed program switching, Auto program switching, Auto setting backup/restore, Threshold changing in RUNIndicatorsOUT, TRIG, STATUS, LINK/ACT, SDInputTypeSwitchable between non-voltage input and voltage inputFor no-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit)For voltage input: Maximum input rating 30 V, ON voltage 18 V or higher, OFF current 0.15 mA or lower, ON current 2 mA (for 24 V)Number of inputs6 ports, 3 ports are selectable as IN/OUTFunctionIN1: External trigger,IN2, IN3, I/O1 to I/O3: Enable by assigning optional functionsAssignable functions: Program switching, Clear error, External master image registration, SD card save cancelOutputTypePhoto MOS relay output, N.O./N.C. SwitchableMaximum rating 30 V 50 mA, residual voltage 1.5 V or less *10Number of outputs6 ports, 3 ports are selectable as IN/OUTFunctionEnable by assigning the optional functionsAssignable functions: Total judgment (OK/NG), Run, Busy, Position adjustment result, Judgment result of each tool, Result of the logical operation of each tool,Error, SD card error, Variety discrimination result, Master judgment resultPower/I/OConnectorM12 12 pin A code Male connectorPoEPoE power Class 3/4/6  *11EthernetStandard1000BASE-T/100BASE-TXConnectorM12 8 pin X code Female connectorNetwork functionFTP client, SFTP clientInterface compatibilityBuilt-in EthernetEtherNet/IP®, PROFINET *12, TCP/IP non-procedure communicationExpanded memorymicroSD card (microSD/microSDHC) *13RatingsPower voltage24 VDC +25%/-20% (including ripple) *14Current consumption3.3 A or less (without the AI Lighting unit, and including the output load)1.8 A or less (AI Lighting unit, and including the output load) *15Environmental resistanceEnclosure ratingIP67 *16Ambient temperature0 to +50°C 32 to 122°F (No freezing) *17Relative humidity35 to 85% RH (No condensation)Vibration resistance10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours in each of the X, Y, and Z directions *18Shock resistance500 m/s2 1640'/s2, 3 times in each of the 6 directions *18MaterialMain unit case: Aluminum die-casting/PBT/TPUIndicator light cover: TPUEthernet connector: Aluminum die-casting/LCPFront cover: Acrylic (hard coating)Power connector: Aluminum die-casting/LCPNameplate: PETWater proof cap for the Power connector: PC+ABS alloyWater proof cap for the Ethernet connector: PCWeightApprox. 300 g 10.59 oz (without the AI Lighting unit)Approx. 495 g 17.47 oz (with the AI Lighting unit)*1 Removing the polarizing filter is recommended when used at distances of 3 m 9.8' or more.*2 Color type only.*3 Monochrome type only.*4 The focusing position can be automatically adjusted at the time of installation. Disabled during operation. The focusing position can be registered by programs.*5 Tools can be installed by programs. This is the number of detection tools and position adjustment tools. Up to 64 detection tools can be set. The number of detection tools in Sorting mode are eight tools.*6 Saves to the sensor’s internal memory. The images saved to the sensor can be backed up to a USB memory stick inserted into the control panel (IV3-CP50) or to the PC where the software for the IV3 Series (IV3-H1) is being used.*7 Learning tool only.*8 Can also be displayed on the control panel (IV3-CP50) or the software for the IV3 Series (IV3-H1).*9 Usable on the software for the IV3 Series (IV3-H1).*10 Make sure to keep a total of each output with 120 mA or less.*11 For a PoE power supply device, IEEE802.3at power class 4 or higher is recommended when using the AI Lighting unit, and IEEE802.3bt power class 6 or higher is recommended when the AI Lighting unit is not used. When using PoE operation may be restricted due to power limitation.*12 Conformance Class B, applicable protocol: LLDP, SNMP.*13 Use only products recommended by KEYENCE.*14 When using the OP-88656 (10 m 32.8'), the power voltage is 24 V DC +25%/-10% (including ripple).*15 The peak current is designed to be smaller if the AI Lighting unit is mounted. The peak current is greater if the AI Lighting unit is not mounted.*16 Except when the polarizing filter (OP-88640/OP-88641/OP-88644/OP-88645) is mounted.*17 For situations where the operating ambient temperature will exceed 40°C 104°F, follow KEYENCE’s specified heat dissipation measures to ensure the case temperature does not exceed the rated maximum temperature (65°C 149°F). Check the instruction manual for more information.*18 Except when the dome attachment (IV3-D10) is mounted.