LR-W500C

Subscribe to get prices

Model: LR-W500C

Order No: LR-W500C

SKU: 10000006565301

Size: 12.00 cm,10.00 cm,3.50 cm

Weight: 0.11kg

In Stock

Brief Introduction

LR-W500C

ModelLR-W500CTypeM12 connector 4-pin typeDetecting distance30 to 500 mm 1.18" to 19.69"Min. spot diameterAdjustable spotApprox. ø3.5 mm at 100 mm ø0.14" at 3.94"Approx. ø9 mm at 250 mm ø0.35" at 9.84"Approx. ø18 mm at 500 mm ø0.71" at 19.69"Light sourceWhite LEDMutual interference reduction functionUp to 2 units when alternate frequencies setTimerOFF/ON delay/OFF delay/One-shotResponse time200 µs/1 ms/10 ms/100 ms/500 ms selectable *1I/OControl outputNPN open collector/PNP open collector selectable30 VDC or less, 50 mA or less, remaining voltage: 2 V or lessN.O./N.C. selectable*2External inputTuning /Transmission OFF selectableShort circuit current: 1 mA or less for NPN/2 mA or less for PNPFor the applied voltage, see the wiring diagrams in the instruction manual.For the input times, see the time charts in the instruction manual.*2Protection circuitProtection against reverse power connection, power supply surge, output overcurrent, output surge, and reverse output connectionPower supplyPower voltage10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPSCurrent consumption65 mA or less (without load) at 24 VDC;120 mA or less (without load) at 12 VDC *3Environmental resistanceEnclosure ratingIP65/IP67 (IEC60529)Ambient lightIncandescent lamp: 10,000 lux or less, Sunlight: 20,000 lux or lessAmbient temperature-20 to +50 °C -4 to 122 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase: Zinc die cast (Nickel chrome plating),Indicator cover: PPSU, Buttons: PESLens cover and display: PMMA (scratch-resistant coating),Spot adjustment dial: Iron (triiron tetraoxide coated)Connector ring: PMP, Connector socket: PEIWeightApprox. 110 g*1 When alternate frequencies are set, the response time increases by approximately 20%.*2 IO-Link: Specification v.1.1/COM2 (38.4 kbps) is supported. The setup file can be downloaded from KEYENCE website (http://www.keyence.com).If you are using the product in an environment in which you cannot download files over the Internet, contact your nearest KEYENCE office.*3 195 mA or less (at 10 V, with load)

Description

Model

LR-W500C

Type

M12 connector 4-pin type

Detecting distance

30 to 500 mm 1.18" to 19.69"

Min. spot diameter

Adjustable spot
Approx. ø3.5 mm at 100 mm ø0.14" at 3.94"
Approx. ø9 mm at 250 mm ø0.35" at 9.84"
Approx. ø18 mm at 500 mm ø0.71" at 19.69"

Light source

White LED

Mutual interference reduction function

Up to 2 units when alternate frequencies set

Timer

OFF/ON delay/OFF delay/One-shot

Response time

200 µs/1 ms/10 ms/100 ms/500 ms selectable *1

I/O

Control output

NPN open collector/PNP open collector selectable
30 VDC or less, 50 mA or less, remaining voltage: 2 V or less
N.O./N.C. selectable
*2

External input

Tuning /Transmission OFF selectable
Short circuit current: 1 mA or less for NPN/2 mA or less for PNP
For the applied voltage, see the wiring diagrams in the instruction manual.
For the input times, see the time charts in the instruction manual.
*2

Protection circuit

Protection against reverse power connection, power supply surge, output overcurrent, output surge, and reverse output connection

Power supply

Power voltage

10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS

Current consumption

65 mA or less (without load) at 24 VDC;
120 mA or less (without load) at 12 VDC *3

Environmental resistance

Enclosure rating

IP65/IP67 (IEC60529)

Ambient light

Incandescent lamp: 10,000 lux or less, Sunlight: 20,000 lux or less

Ambient temperature

-20 to +50 °C -4 to 122 °F (No freezing)

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions

Shock resistance

1,000 m/s2, 6 times in each of the X, Y, and Z directions

Material

Case: Zinc die cast (Nickel chrome plating),
Indicator cover: PPSU, Buttons: PES
Lens cover and display: PMMA (scratch-resistant coating),
Spot adjustment dial: Iron (triiron tetraoxide coated)
Connector ring: PMP, Connector socket: PEI

Weight

Approx. 110 g

*1 When alternate frequencies are set, the response time increases by approximately 20%.
*2 IO-Link: Specification v.1.1/COM2 (38.4 kbps) is supported. The setup file can be downloaded from KEYENCE website (http://www.keyence.com).
If you are using the product in an environment in which you cannot download files over the Internet, contact your nearest KEYENCE office.
*3 195 mA or less (at 10 V, with load)

Unsubscribe

Discount Code

Subscribe
: 0.021675109863281