Brief Introduction

CZ-V21AP

ModelCZ-V21AP*1OutputPNP outputMain unit/expansion unitMain unitResponse time200 µs (HIGH SPEED) /1 ms (FINE) /4 ms (TURBO) /8 ms (SUPER)Control outputPNP open-collector x 4 channels, 30 VDC max., Up to 100 mA for one output, Up to 200 mA in total of 4 outputs, Residual voltage: 1.0 V max.*2Protection circuitReverse-polarity protection, overcurrent protection, surge absorberExternal tuning input, external bank switch input (C/C + I-mode), external shift input (super I-mode)Input time: 20 ms min.Timer functionTimer OFF/OFF-delay/ON-delay/One-shot, Timer time: 1 to 1000 ms adjustable (for each bank respectively)Unit expansionUp to 3 units (4 units total including the main unit)Number of interference prevention units0 for HIGH SPEED; 2 for FINE/TURBO/SUPERRatingPower voltage24 VDC, Ripple (P-P) 10 % or lessPower consumptionNormal mode: 1.5 W (62.5 mA or less), Eco-mode: 1 W (42.0 mA or less)Environmental resistanceAmbient temperature-10 to +55 °C 14 to 131 °F (No freezing)*3Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axisMaterialHousing, cover: PolycarbonateAccessoriesMounting FittingsWeightApprox. 110 g*1 The expansion unit of the FS-V20 Series cannot be connected to the main unit of the CZ-V20 Series. To connect the FS and CZ Series units, connect the expansion unit of the CZ-V20 Series tothe main unit of the FS-V20 Series.To connect two or more expansion units, connect the CZ-V20 Series units on the right of the FS-V20 Series units.*2 20 mA max. when several units are connected.*3 When several units are connected, the acceptable ambient temperature varies depending on the conditions given below. To connect several units, be sure to mount them to a DIN rail and to limit the output current to a maximum of 20 mA. When 1 or 2 units are connected: -10 to +50 °C 14 to 122 °F When 3 units are connected: -10 to +45 °C 14 to 113 °F