Brief Introduction

LR-TB2000

ModelLR-TB2000TypeCableDetectable distance60 to 2000 mm 2.36" to 78.74"*1Spot diameterApprox. ø4 mm ø0.16"Light sourceTypeRed laser (660 nm)Laser classClass 2 laser product(IEC60825-1,FDA (CDRH) Part1040.10*2)Mutual interference prevention function4 units (when using the interference prevention function)TimerOFF/OFF delay/ON delay/One-shotResponse time1 ms/10 ms/25 ms/100 ms/1000 msselectableI/OControl outputNPN open collector/PNP open collector selectable30 VDC or less, 50 mA or less, residual voltage: 2 V or less,N.O./N.C. selectable*3*4Analog output-Protection circuitProtection against reverse power connection, power supply surges, output overcurrent, reverse output connection, and output surgePower voltage20 to 30 VDC, including 10% ripple (P-P), Class 2 or LPSCurrent consumption45 mA or less (without load)*5Environmental resistanceEnclosure ratingIP65/IP67 (IEC60529)Ambient lightIncandescent lamp/Sunlight: 10,0000 lux or lessAmbient temperature-20 to +55 °C -4 to 131 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase: Zinc die cast (Nickel chrome plating),Indicator cover and buttons: PES,Lens cover and display: PMMA (scratch-resistant coating specifications),Cable bushing: PBT,Cable: PVCAccompanying itemsInstruction manual,Laser warning and explanation labelsWeightApprox. 125 g (Including cable)*1 The range for displayable distance is from 50 to 2200.*2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*3 You can select the I/O from the following combinations.Control output × 2, control output + external inputControl output + analog output (LR-TB5000/TB5000C/TB5000CL only)External input + analog output (LR-TB5000/TB5000C/TB5000CL only)(For details on the setting method, see the instruction manual.)*4 IO-Link specification v.1.1/COM2 (38.4 kbps) is supported. You can download a setup file from the KEYENCE website (http://www.keyence.com).If you are using the product in an environment in which you cannot download files over the Internet, contact your nearest KEYENCE office.*5 145 mA or less (with load)