Brief Introduction

LR-ZB100N

ModelLR-ZB100NTypeDistance based laser sensorAppearanceRectangularOutputNPNCable connection2 m cableDetectable distance35 to 100 mm 1.38" to 3.94" (650 to 0)*1Standard detectable deviation35 to 50 mm 1.38" to 1.97": 1.5 mm 0.06"50 to 100 mm 1.97" to 3.94": 3 mm 0.12"Display resolution2 (0.2 mm 0.008")Spot sizeApprox. 2 × 1 mm 0.08" × 0.04" at 100 mm 3.94"Response time1.5 ms / 10 ms / 50 ms selectableLight sourceTypeRed laser (660 nm)Laser classClass 1 laser product(IEC60825-1, FDA (CDRH) Part1040.10*2)FunctionIndicator3-digit 7-segment display (red),output indicator (yellow),DATUM indicator (orange),1 spot indicator (green)TimerOFF/ON delay/OFF delay/One-shotSpecificationsPower voltage10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPSPower consumption450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)Control outputNPN Open collector,Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mAProtection circuitProtection against reverse power connection, output overcurrent, output surge, reverse output connectionOutput operationLight-ON / Dark-ON selectableExternal inputInput time calibration: 35 ms or more ON, 35 ms or more OFFLaser emission stop: 2 ms or more ON, 20 ms or more OFFShort-circuit current NPN: 1 mA or less/PNP: 2 mA or lessEnvironmental resistanceEnclosure ratingIP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB*3, Diversey*3Insulation resistance20 MΩ or more (500 VDC)Ambient lightIncandescent lamp: 4,000 lux or lessSunlight: 8,000 lux or less*4Ambient temperature-10 to +50 °C 14 to 122 °F (No freezing)Storage temperature-25 to +75 °C -13 to 167 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Withstand voltage1,000 VAC, 50/60 Hz, 1 minVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKMAccompanying itemsInstruction Manual,Certification/Identification label (FDA)WeightApprox. 110 g (Including cable)*1 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed.*2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*3 Have passed resistance tests with cleaning agents from multiple manufactures.*4 When the response time is 10 ms