Brief Introduction

LS-H901

Regulatory compliance EMC Directive, RoHS Directive<br/> Applicable amplifiers LS-501(P), LS-501(P)-C2<br/> (Note：When using the thru-beam type LS-H101□ or LS-H102□, do not set the receiving light sensitivity (gctL) of the applicable LS-500 series amplifier to level 2 or less. <br/> This is because there is a possibility of sensing becoming unstable.)<br/> Sensing range:H-SP mode 1m 3.281 ft<br/> (Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm 3.937 × 3.937 in) as the object.)<br/> (Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector.<br/> In addition, the sensing range is the possible setting range for the reflector. <br/> The sensor can detect an object less than 0.01 m 0.033 ft away.<br/> Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received.<br/> In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. <br/> The incident light intensity may vary with the condition of the reflector surface. When using one of the applicable LS-500 series amplifiers, leave an adequate safety margin when setting the threshold.)