The PAM8403 is a 3W, class-D audio amplifier. It offers low THD+N, allowing it to achieve high-quality sound reproduction. The new filterless architecture allows the device to drive the speaker directly, requiring no low-pass output filters, thus saving system cost and PCB area.With the same...

The AS324/324A consist of four independent, high gain and internally frequency compensated operational amplifiers. They are specifically designed to operate from a single power supply. Operation from split power supplies is also possible and the low power supply current drain is independent of...

The AS358/358A consist of two independent, high gain and internally frequency compensated operational amplifiers, they are specifically designed to operate from a single power supply. Operation from split power supply is also possible and the low power supply current drain is independent of...

The AZ431-A is a three-terminal adjustable shunt regulator with guaranteed thermal stability over a full operation range. It features sharp turn-on characteristics, low temperature coefficient and low output impedance, which make it ideal substitute for Zener diode in applications such as...

The LM2902/2904 series amplifiers consist of four and two independent high-gain operational amplifiers with very low input offset voltage specification. They have been designed to operate from a single power supply over a wide range of voltages; however operation from split power supplies is...

PCIe 3.0, 2-Lane (4-Channel), Differential 2:1 Mux/DeMux. 3.3V                                 

The PI3PCIE3412A is an 8 to 4 differential channel multiplexer/demultiplexer switch. This solution can...

High Speed SPDT Analog Switch with Compact Packages          The PI5A124 are analog switches designed for single-supply operation. These high-precision devices are ideal for low-distortion audio, video, signal switching and routing. These switches are fully specified...

1:4 Clock Driver for Intel PCI Express Chipsets   PI6C20400 is a high-speed, low-noise differential clock buffer designed to be companion to PI6C410B. The device distributes the differential SRC clock from PI6C410B to four differential pairs of clock outputs either with or without...

16 Output LVDS Fanout Buffer                           

The PI6C5921516 is a high performance LVDS fanout buffer device which supports up to 1.5GHz frequency. This device is ideal for systems that need to distribute...

Diodes - General Purpose, Power, Switching Small Signal Diode 

DIODE GEN PURP 75V 150MA SOD323F                   

  • Fast Switching Speed

• Small Surface Mount...

The AL1692 is a high performance, high power factor, high efficiency, and high current precision buck-boost and flyback dimmable LED controller/drivers for triac dimmable LED lamp applications. The AL1692 topology provides an accurate output current over wide line and load regulation. The wide...

LED Driver IC 1 Output DC DC Regulator Step-Down (Buck) Analog, PWM Dimming 1A (Switch) SOT-25      The AL8805 is a step-down DC/DC converter designed to drive LEDs with a constant current. The device can drive up to 8 LEDs, depending on the forward voltage of the LEDs, in...

1.0A RECTIFIER                                                                               ...

SURFACE MOUNT FAST SWITCHING DIODE                                          

Fast Switching Speed

 Small Surface Mount Package 

 For General Purpose Switching...

switching diode                                          • Case: SOD123

• Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0

• Moisture Sensitivity:...

300mW DUAL SURFACE MOUNT ZENER DIODE                       Dual Zeners in Common Anode Configuration

 300mW Power Dissipation Rating

 Ideally Suited for Automated Insertion

  VZ for Both Diodes in One Case is ...

0.5A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER             • Low Forward Voltage Drop 

• Guard Ring Die Construction for Transient Protection 

• High Conductance                     ...

1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER         

 • Guard Ring Die Construction for Transient Protection 

• Low Leakage Current 

• Low Forward Voltage Drop                   ...

 Guard Ring Die Construction for Transient Protection

 Ideally Suited for Automated Assembly

 Low Power Loss, High Efficiency                           

  Case: SMA 

 Case Material:...

SURFACE MOUNT FAST SWITCHING DIODE ARRAY                 

• Fast Switching Speed 

• Ultra-Small Surface Mount Package 

• For General Purpose Switching Applications 

• High Conductance     ...

4.0A GLASS PASSIVATED BRIDGE RECTIFIER                     Glass Passivated Die Construction

 High Case Dielectric Strength of 1500VRMS

 Low Reverse Leakage Current

 Surge Overload Rating to 150A Peak

 Ideal for...

3.0A SURFACE MOUNT FAST RECOVERY RECTIFIER                • Glass Passivated Die Construction 

• Fast Recovery Time for High Efficiency 

• Surge Overload Rating to 100A Peak 

• Ideally Suited for Automatic Assembly ...

1.0A SURFACE MOUNT GLASS PASSIVATED RECTIFIER                Glass Passivated Die Construction for High Reliability

 Surge Overload Rating to 30A Peak

 Ideally Suited for Automated Assembly             ...

10A SBR SUPER BARRIER RECTIFIER PowerDI5                  Designed as Bypass Diodes for Solar Panels

 Selectively Rated for +200°C Maximum Junction Temperature 

for High Thermal Reliability

 Patented Super Barrier Rectifier...

8A SBR®  SUPER BARRIER RECTIFIER POWERDI                 

    Ultra Low Forward Voltage Drop 

 Patented Super Barrier Rectifier Technology 

 Soft, Fast Switching Capability

 150°C Operating...

SURFACE MOUNT SCHOTTKY BARRIER DIODE                      Low Forward Voltage Drop 

 Guard Ring Construction for Transient Protection 

 Negligible Reverse Recovery Time 

 Low Reverse...

   1.0A SURFACE MOUNT ULTRA-FAST RECTIFIER                 

 Glass Passivated Die Construction 

 Ultra-Fast Recovery Time for High Efficiency 

 Surge Overload Rating to 30A Peak 

 High Current...

40V SURFACE MOUNT SCHOTTKY BARRIER DIODE               

  A surface mount Schottky Barrier Diode featuring low forward voltage drop suitable for high frequency rectification and reverse voltage protection.

Application(s)

Mobile...

Complementary, 50V, 0.1A, SOT363                         

Epitaxial Planar Die Construction

 Built-In Biasing Resistors

 Surface Mount Package Suited for Automated Assembly    Package:...

 NPN PRE-BIASED SMALL SIGNAL SURFACE MOUNT TRANSISTOR       Epitaxial Planar Die Construction

 Built-In Biasing Resistors

 Surface Mount Package Suited for Automated Assembly    Case: SOT323

 Case Material: Molded Plastic, “Green” Molding...

60V 175°C N-CHANNEL ENHANCEMENT MODE MOSFET         

 This MOSFET is designed to meet the stringent requirements of Automotive applications. It is qualified to AEC-Q101, supported by a PPAP. 

 Application(s)

Engine Management...

400V NPN HIGH VOLTAGE TRANSISTOR IN SOT23                 

   BVCEO > 400V

 IC = 225mA High Continuous Collector Current

 ICM = 1A Peak Pulse Current

 500mW Power Dissipation

 Excellent hFE...

160V NPN SMALL SIGNAL TRANSISTOR IN SOT23                 

• BVCEO > 160V

• Ideal for Low Power Amplification and Switching

• Complementary PNP Type Available (MMBT5401             

•...

400W Surface Mount Transient Voltage Suppressor            400W Peak Pulse Power Dissipation

 Glass Passivated Die Construction

 Unidirectional and Bidirectional Versions Available

 Excellent Clamping Capability

 Fast Response...

N-CHANNEL ENHANCEMENT MODE MOSFET  

This MOSFET utilises a structure that combines low input 

capacitance with relatively low on-resistance and has an intrinsically 

higher pulse current handling capability in linear mode than a 

comparable trench technology structure. This MOSFET is suitable...

The PI3EQX1002B is a low power, high performance 10.0 Gbps 1-Port USB 3.1 linear ReDriver™ designed specifically for the USB 3.1 protocol. The device provides programmable equalization, linear swing and flat gain to optimize performance over a variety of physical mediums by reducing...

1:2 HDMI 2.5Gbps Splitter/DeMux with Equalization, Pre-emphasis, and De-emphasis with 10KV ESD      The PI3HDMI412AD, active-drive switch solution is targeted for high-resolution video networks that are based on DVI/HDMITM standards, and TMDS signal processing. The PI3HDMI412AD...

The AL3022 is a constant 150KHz, voltage mode, external compensation boost controller. The AL3022 has low reference voltage and makes it ideal for low cost LED backlight supplies. 

The AL3022 can support external PWM dimming and analog dimming. The AL3022 employs complete protection...

The DESD2CAN2SOQ is a next generation ESD and surge protection device packaged in a low profile, small form factor package that features side wall plating for easy optical inspection. It is qualified to AECQ101, supported by a PPAP.

This MOSFET is designed to meet the stringent requirements of 

automotive applications. It is qualified to AEC-Q101, supported by a 

PPAP and is ideal for use in:

Motor controls

DC-DC converters

Power management functions

This MOSFET has been designed to minimize the on-state resistance (RDS(ON)) and yet maintain superior switching performance, making it ideal for high efficiency power management applications.

The AL8860 is a hysteresis mode DC/DC step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage. The device can operate from an input supply between 4.5V and 40V and provide an externally adjustable output...

The AP7366 is a 600mA, adjustable and fixed output voltage, low dropout linear regulator. This device includes pass element, error amplifier, band-gap, current limit and thermal shutdown circuitry. The device is turned on when EN pin is set to logic high level.

The characteristics of low...

The AZ1117 is a series of low dropout three-terminal regulators with a dropout of 1.15V at 1A output current.The AZ1117 series provides current limiting and thermal shutdown.Its circuit includes a trimmed bandgap reference to assure output  voltage accuracy to be within 1% for 1.5V, 1.8V,...

300MA, High Speed, Extremely Low Noise CMOS LDO Regulator. The AP2125 series are 300mA, positive voltage regulator ICs fabricated by CMOS process. Each of these ICs is equipped with a voltage reference, an error amplifier, a resistor network for setting output voltage, a chip enable circuit, a...

The AP2204 series is a positive voltage regulator IC fabricated by high voltage EPNP process.

The AP2204 has features of wide input voltage range, high accuracy, high ripple rejection, low dropout voltage, low noise, current limit and ultra-low quiescent current which make it ideal for...