Different from the previous unmanaged optical fiber transceivers, TP-LINK cloud optical fiber provides efficient, simple, secure and easy-to-use remote management methods, and supports functions such as intelligent deployment, automatic configuration networking, and abnormal alarms. Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios.
- 1 x 100/1000Mbps SC fiber port, 4 x 10/100/1000Mbps RJ45 network port
- Based on wavelength division multiplexing technology (transmit wavelength 1310nm, receive wavelength 1550nm), single-mode single-fiber transmission, up to 20 km
- It supports remote management of business cloud APP, web and local web management
- It supports intelligent deployment, abnormal alarms, and fast troubleshooting
- Supports 802.1Q VLAN, QoS, and bandwidth control
- Supports port aggregation, port traffic statistics, port monitoring, and port isolation
- Recommended for use with TL-FC2311A-20
Full Gigabit port, supporting 20km single-mode single-fiber transmission
-
The TL-FC2314B-20 provides one 100/1000Mbps SC fiber port and four 10/100/1000Mbps RJ45 ports.
-
Using WDM (wavelength division multiplexing) technology, the transmit wavelength is 1310nm, the receiving wavelength is 1550nm, and the single fiber transmits and receives, saving half of the optical fiber wiring cost.
-
With single-mode optical fiber, the transmission distance can reach up to 20km.
-
Recommended for use with TL-FC2311A-20.
It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted
-
Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient.
-
It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client.
Scan the code to add devices with one click and automatically configure the networking
-
Simplify the steps of adding devices, just scan the QR code on the fuselage to add a fiber optic transceiver, and automatically identify all devices connected to the fiber optic transceiver.
-
Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand.
View port status in real time and provide timely alarms for exceptions
-
Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance.
-
Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency.
Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated
-
Port aggregation is supported, which can provide higher uplink rates.
-
Intelligent loop protection automatically detects the network topology and automatically repairs the loop as soon as it is found, effectively preventing network congestion and faults caused by network loops.
Simple and practical network management functions
-
IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs.
-
It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration.
-
Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring.
-
Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface.