USD
- USD
- CNY
- HKD
- EUR
English
- العربية
- čeština
- dansk
- Deutsch
- Ελληνικά
- English
- Español
- Français
- ic
- Italiano
- Netherlands
- norsk Språk
- język polski
- pt
- Português
- 中文
Interface Converters Price List
| Model | Description | Leading | Price |
|---|---|---|---|
|
To carry out the digital communication between external devices or intelligent instruments with different standard serial interfaces, standardize the serial conversion is necessary. Rs 232 to TTL converter(UT-210) converts data (TXD, RXD) of RS-232C to TTL/COM; the TTL electrical level is 0-5V,...
|
In Stock
|
Subscribe
|
|
|
UT-2501 adopts optoelectronic isolation technology, it fully isolate the electric and ground wire loop circuit between both sides of RS-232 device, protects the communication device from power ground wire loop circuit and surge interference. The built-in instant voltage protector protects CANBUS...
|
In Stock
|
Subscribe
|
|
|
UT-2112 is a RS-232 optoelectronic isolator. It adopts advanced optoelectronic isolation technology, maximally protects RS-232 serial interface devices from bad environment damage, such as ground loop circuit voltage, surge, lightning, ESD, hot-plug and electromagnetic interference, etc. The...
|
In Stock
|
Subscribe
|
|
|
UT-211 is a RS-232 serial port optoelectronic isolator. It adopts advanced optoelectronic isolation technology, maximally protects RS-232 serial interface devices from bad environment damage, such as ground loop circuit voltage, surge, lightning, ESD, hot-plug and electromagnetic interference,...
|
In Stock
|
Subscribe
|
|
|
UT-215 is a RS-232 serial port optoelectronic isolator. It adopts advanced optoelectronic isolation technology, maximally protects RS-232 serial interface devices from bad environment damage, such as ground loop circuit voltage, surge, lightning, ESD, hot-plug and electromagnetic interference,...
|
In Stock
|
Subscribe
|
|
|
UT-5202 is a hub special designed for RS-485 BUS under complicated electromagnetic field. The transmission rate for this hub is as high as 115.2KBPS. To ensure the safety and reliability of the data communication, RS-485 port adopts optoelectronic isolation technology to prevent from lightning...
|
In Stock
|
Subscribe
|
|
|
UT-1208 is a RS-485 Hub special designed for RS485 system under complicated electromagnetic field. With dual core and non-stop running, the transmission rate can be up to 115.2KBPS. To ensure the safety and reliability of the communication, it adopts optoelectronic isolation technology on RS-485...
|
In Stock
|
Subscribe
|
|
|
UT-1216 is a RS-485 bus splitting HUB with internal quad-core, non-halt design, designed to address the requirements of RS-485 systems in complex electromagnetic field environments. The product supports transmission rate up to 115.2Kbps. To ensure safe and reliable data communication, the RS-485...
|
In Stock
|
Subscribe
|
|
|
UT-5204 is a hub special designed for RS-485 BUS under complicated electromagnetic field. The transmission rate for this hub is as high as 115.2KBPS. To ensure the safety and reliability of the data communication, RS-485 port adopts optoelectronic isolation technology to prevent from lightning...
|
In Stock
|
Subscribe
|
|
|
UT-1208U is a RS-485 Hub special designed for RS485 system under complicated electromagnetic field. With dual core and non-stop running, the transmission rate can be up to 115.2KBPS. To ensure the safety and reliability of the communication, it adopts optoelectronic isolation technology on RS-485...
|
In Stock
|
Subscribe
|
|
|
UT-1208H is a RS-485 Hub special designed for RS485 system under complicated electromagnetic field. With dual core and non-stop running, the transmission rate can be up to 115.2KBPS. To ensure the safety and reliability of the communication, it adopts optoelectronic isolation technology on RS-485...
|
In Stock
|
Subscribe
|
|
|
UT-1304 is a RS-485/422 Hub special designed for RS485/422 system under complicated electromagnetic field. With built-in micro CPU(non-stop running), the transmission rate can be up to 115.2KBPS. To ensure the safety and reliability of the communication, it adopts optoelectronic isolation...
|
In Stock
|
Subscribe
|
|
|
UT-1304H is a RS485 Hub special designed for RS485/422 system under complicated electromagnetic field. With built-in micro CPU(non-stop running), the transmission rate can be up to 115.2KBPS. To ensure the safety and reliability of the communication, it adopts optoelectronic isolation technology...
|
In Stock
|
Subscribe
|
|
|
As the PC industry growing, most of the low speed external ports are replaced by USB port. In industrial environment, lots of important equipments still adopt RS-485/422 interface design. With this, most of the users use USB to RS-485/422 converter to transmit the data between PC and RS-485/422...
|
In Stock
|
Subscribe
|
|
|
USB to serial port converter allows you easy to establish the reliable connection. USB supports plug and play, hot swap; this makes you easy to connect RS-232 port. This design makes you convenient to connect mobile phone, digital camera, ISDN-TA, Modem with as high as 1Mbps transmission rate....
|
In Stock
|
Subscribe
|
|
|
UT-861A is an USB/RS-485/422 converter with no external power supply, built-in opto-isolator and DC/DC power isolation module. Compatible with USB, RS-422, RS-485 standards, it can convert single-ended USB signals to balanced differential RS-422 or RS-485 signals with built-in opto-isolator,...
|
In Stock
|
Subscribe
|
|
|
UT-807 is a 7-port industrial USB2.0 hub that can expand 1 USB port to 7 USB ports. This hub supports true USB 2.0 high speed with transmission rates up to 480Mbps per USB port, and this hub complies with the USB Plug and Play specification. Each port provides 500mA output capability. Each port...
|
In Stock
|
Subscribe
|
|
|
As the PC industry continues to evolve, the USB interface is gradually replacing the various low-speed peripheral interfaces of older PCs. However, many important devices in the current industrial environment still use the RS-232 interface design, so many users use USB to RS-232 converters to...
|
In Stock
|
Subscribe
|
|
|
As the development of PC, USB port starts to replace most of the low speed external ports from old PC. In industrial field, most of the devices or equipments are still using RS-232 interface. In this situation, we need to use USB to RS-232 converter to complete the data transmission between PC...
|
In Stock
|
Subscribe
|
|
|
As the development of PC, USB port starts to replace most of the low speed external ports from old PC. In industrial field, most of the devices or equipments are still using RS-232 interface. In this situation, we need to use USB to RS-232 converter to complete the data transmission between PC...
|
In Stock
|
Subscribe
|
|
|
UT-882 converter allows you to build reliable connection by converting RS-232 to USB. The design makes you convenient to connect your cell phone, digital camera, ISDN-TA, Modem with 1Mbps transmission rate.
UT-882 USB to RS-232 converter provides reliable connection for point to point...
|
In Stock
|
Subscribe
|
|
|
UT-885 is a universal USB to RS-485/422 converter, there is no need of external power supply. It complies with USB, RS422, and RS-485 standards; it converts USB signal to a balanced differential RS-422 or RS-485 signal. The built-in fast instant voltage restraint is designed to protect...
|
In Stock
|
Subscribe
|
|
|
As the development of PC, USB port starts to replace most of the low speed external ports from old PC. In industrial field, most of the devices or equipments are still using RS-232 interface. In this situation, we need to use USB to RS-232 converter to complete the data transmission between PC...
|
In Stock
|
Subscribe
|
|
|
As the PC industry growing, most of the low speed external ports are replaced by USB port. In industrial environment, lots of important equipments are stilling adopts RS-232 interface design. With this, most of the users use USB to RS-485/422 converter to transmit the data between PC and...
|
In Stock
|
Subscribe
|
|
|
As the PC industry growing, USB port is replacing most of the low speed external ports. In industrial environment, lots of important equipments are stilling adopts RS-232 interface design. With this, most of the users use USB to RS-232 converter to transmit the data between PC and RS-232...
|
In Stock
|
Subscribe
|
|
|
As the development of PC, USB port starts to replace most of the low speed external ports from old PC. In industrial field, most of the devices or equipments are still using RS-232 interface. In this situation, we need to use USB to RS-232 converter to complete the data transmission between PC...
|
In Stock
|
Subscribe
|
|
|
As the development of PC, USB port starts to replace most of the low speed external ports from old PC. In industrial field, most of the devices or equipments are still using RS-232 interface. In this situation, we need to use USB to RS-232 converter to complete the data transmission between PC...
|
In Stock
|
Subscribe
|
|
|
UT-2003A is a universal USB/RS-485/422 converter, which with built-in optoelectronic isolator and DC/DC power isolated module. It complies with USB, RS422, and RS-485 standards; it converts single side USB signal to a balanced differential RS-422 or RS-485 signal. The built-in optoelectronic...
|
In Stock
|
Subscribe
|
|
|
UT-860 is a port-powered universal USB/RS-232 converter; there is no need external power. It complies with USB and RS-232 standards; it converts single side USB signal to UART RS-232 signal. RS-232 port adopts DB9 male as connector. This converter is with built-in zero delay auto receiving and...
|
In Stock
|
Subscribe
|
|
|
UT-880-TC is a USB Type-C to RS-232 converter, it is industrial grade , with strong chip, strong compatibility. The product is with indicator light. This product is widely used in modem, bar code machine, tax control machine, PDA, numerical control machine, industrial machine, instrument and so...
|
In Stock
|
Subscribe
|
|
|
As the development of PC, USB port starts to replace most of the low speed external ports from old PC. In industrial field, most of the devices or equipments are still using RS-232 interface. In this situation, we need to use USB to RS-232 converter to complete the data transmission between PC...
|
In Stock
|
Subscribe
|
|
|
UT-890-TC is a USB Type-C to RS-485/422 converter, it is industrial grade , with strong chip, strong compatibility. The product is with indicator light. This product is widely used in modem, bar code machine, tax control machine, PDA, numerical control machine, industrial machine, instrument and...
|
In Stock
|
Subscribe
|
|
|
UT-2016 is a converter with optoelectronic isolation, complying with RS-232C, RS422, and RS-485 standards; it is the rs232 to rs422 converter / rs485 converter. The built-in optoelectronic isolator can provide:Up to 2,500Vrm isolated voltage; Fast instant voltage restraint protector;
This...
|
In Stock
|
Subscribe
|
|
|
UT-218 is a converter with optoelectronic isolation. It complies with RS-232C, RS422, and RS-485 standards; it converts single side RS-232 signal to a balanced differential RS-422 or RS-485 signal. The built-in optoelectronic isolator can provide as high as 2,500Vrm isolated voltage; the fast...
|
In Stock
|
Subscribe
|
|
|
UT-502 is an industrial level converter with optoelectronic isolation. It complies with RS-232C and RS-485 standards; it converts single side RS-232 signal to two balanced differential RS-422 or RS-485 signals. The built-in optoelectronic isolator can provide as high as 2,500Vrm isolated voltage;...
|
In Stock
|
Subscribe
|
|
|
UT-208 is a converter with optoelectronic isolation. It complies with RS-232C, RS422, and RS-485 standards; it converts single side RS-232 signal to a balanced differential RS-422 or RS-485 signal. The built-in optoelectronic isolator can provide as high as 2,500Vrm isolated voltage; the fast...
|
In Stock
|
Subscribe
|
|
|
UT-2530E is an industrial-grade converter with photoelectric isolation. It is compatible with the RS-232C, RS-422, & RS-485 standards. It can convert RS-232 signal into a balanced differential RS-422 or RS-485 signals. The built-in optoelectronic isolator can provide isolation voltage up to 2,500...
|
In Stock
|
Subscribe
|
|
|
UT-216 complies with RS-232C, RS422, and RS-485 standards; it converts single side RS-232 signal to a balanced differential RS-422 or RS-485 signal. The built-in fast instant voltage restraint is designed to protect RS-422/RS-485 interface; it adopts advanced TVS (TRANSIENT VOLTAGE...
|
In Stock
|
Subscribe
|
|
|
UT-8823F is a universal USB/RS-232 converter that does not require an external power supply, is compatible with USB and RS-232 standards, and can convert single-ended USB signals into RS-232 signals. The converter has zero-delay automatic send/receive conversion and unique I/O circuitry that...
|
In Stock
|
Subscribe
|
|
|
UT-1128 is a RS-485 BUS hub with built-in dual core, and non-stop working design. It is special design for RS-485 system under complicated electromagnetic field. The transmission rate can be as high as 115.2Kbps. To ensure the data communication safety and reliability, it adopts optoelectronic...
|
In Stock
|
Subscribe
|
|
|
UT-8422 is a universal USB/RS-485/422 converter that does not require an external power supply, is compatible with USB, RS-485, RS-422 standards, and can convert single-ended USB signals into balanced differential RS-485 or RS-422 signals. It provides surge protection per line, and the...
|
In Stock
|
Subscribe
|
|
|
With the continuous development of the PC industry, USB interfaces are gradually replacing various low-speed peripheral interfaces of old PCs. However, many important devices in industrial environments still use RS-232 interface designs. Therefore, many users use USB to RS-232 converters to...
|
In Stock
|
Subscribe
|
|
|
With the continuous development of PC industry, USB interface is gradually replacing the old PC with various low-speed peripheral interfaces, however, many important devices in industrial environment still use RS-232 interface design, so many users use USB to RS-232 converter to achieve data...
|
In Stock
|
Subscribe
|
|
|
In order to facilitate data communication between external devices or intelligent instruments equipped with different standard serial interfaces, it is necessary to convert the standard serial interfaces. UT-210T interface converter can convert the RS-232C serial interface data transmission...
|
In Stock
|
Subscribe
|
|
|
UT-8251A is a high performance USB and RS-232 to CAN-bus communication protocol converter. The converter supports interconnection between USB and CAN-bus or RS-232 and CAN-bus; and supports power supply or USB power supply, which further extends the application range of this converter. UT-8251A...
|
In Stock
|
Subscribe
|
|
|
UT-6502 is a high performance CAN-bus communication converter integrating 2 CAN interfaces and 1 Ethernet interface. The converter supports 10M/100M Ethernet network and 5Kbps~1Mbps communication rate CAN-bus interconnection, which further extends the application range of CAN-bus and...
|
In Stock
|
Subscribe
|
|
|
As the PC industry growing, most of the low speed external ports are replaced by USB port. In industrial environment, lots of important equipments still adopt RS-485/422 interface design. With this, most of the users use USB to RS-485/422 converter to transmit the data between PC and RS-485/422...
|
In Stock
|
Subscribe
|
|
|
UT-503 is an industrial converter with optoelectronic isolation. It complies with RS-232C, RS422, and RS-485 standards; it converts single side RS-232 signal to a balanced differential RS-422 or RS-485 signal. The built-in optoelectronic isolator can provide as high as 2,500Vrm isolated voltage;...
|
In Stock
|
Subscribe
|
|
|
UT-501 is an industrial port-powered converter with optoelectronic isolation. It complies with RS-232C, RS422, and RS-485 standards; it converts single side RS-232 signal to a balanced differential RS-422 or RS-485 signal. The built-in optoelectronic isolator can provide as high as 2,500Vrm...
|
In Stock
|
Subscribe
|
|
|
UT-2506A is a high performance RS-232/485 to CAN-Bus converter. It supports interconnection between RS-232/485 and CAN-Bus. RS-232/485 baud rate is 1,200-115,200bps, and CAN-bus baud rate is 5kbps-1Mbps.The converter supports three data conversion modes: transparent conversion, transparent tape...
|
In Stock
|
Subscribe
|
Download Price List
Unsubscribe
Subscribe